Insul-lock® self seal 6'l, 2" nom. I.D, 1/2" wall thickness this superior closed cell insulation is designed to retard heat flow and prevent condensation when properly installed. Insul-lock® seam-seal pipe insulation is pre-slit with a factory applied specially formulated bonding adhesive applied to both seam surfaces and comes with convenient built-in release liners which allow for easy installation.
- Ideal for applications such as refrigerant lines, cold water plumbing, roof drains and chilled water systems
- Insul-lock® seam-seal pipe insulation is made from a uv resistant elastomeric blend
- For moderate uv exposure, no additional protective coating needed
- However, for severe uv exposure (rooftop applications) or where optimum performance is required, 374 protective coating or approved jacketing or cladding should be used
- Specification complianceastm c 534 type 1 (tubing), grade 1 astm d 1056-00-2c1 new york city mea 186-86-m vol
- Iv usda requirements
- Ul 94-5v flammability classification (recognition no
- E300774) astm e 84 1-1/2" 25/50-tested according to ul 723 and nfpa 255 complies with requirements of can/ulc s102-03
- Fmrc approval guide chapter 14 pipe insulation
- Meets requirements of nfpa 90a sect
- 2.3.3 for supplementary materials for air distribution systems
- Meets requirements of astm c 411 (test method for hot surface performance of high temperature thermal insulation)
- Meets requirements of ul 181 sections 11.0 and 16.0 (mold growth/air erosion)
- Sold in package quantity of 18, priced each.
- Brand K-flex usa
- Manufacturers part number 6rxl048200
- Package quantity 1
- Color finish Black
- Length feet 6
- Wall thickness inches 1/2
- Thermal conductivity 75°f mean .25 btu-in/hr-ft²-°f
- Ozone resistance Pass
- Water absorption % ≪0.20 by volume
- Density 3-6 pcf
- Water vapor permeability dry cup ≪0.06
- Mildew resistance/ air erosion Pass
- Type With core
- Description Tubular insulation
- Chemical/ solvent resistance Good
- Flame spread up to 1/2" thickness Not greater than 25
- Operating temperature range -70°f - 200°f
- Smoke developed up to 1/2" thickness Not greater than 50
- Thermal conductivity 90°f mean .27 btu-in/hr-ft²-°f
- Nominal inside diameter inches 2
