Insul-tube® 6'l, 3/8" wall thickness, 1/2" nom. I.D
Insul-tube® is used to retard heat gain and prevent condensation or frost formation on refrigerant lines, cold water plumbing, and chilled water systems. It also retards heat flow for hot water plumbing, liquid heating, dual temperature piping, and many solar systems.
Insul-tube® is used to retard heat gain and prevent condensation or frost formation on refrigerant lines, cold water plumbing, and chilled water systems. It also retards heat flow for hot water plumbing, liquid heating, dual temperature piping, and many solar systems.
- Designed for the hvac and refrigeration industry
- Insul-tube® is non-porous, non-fibrous and resists mold growth
- An epa registered antimicrobial agent is incorporated into the product providing additional protection against mold, fungal and bacterial growth
- Insul-tube® pipe insulation is made from a uv resistant elastomeric blend
- For moderate uv exposure, no additional protective coating is needed
- However, for severe uv exposure (rooftop applications) or where optimum performance is required, 374 protective coating or approved jacketing or cladding should be used.
Specification compliance Astm c 534 type 1 (tubing) grade 1, astm d 1056-00-2c1 new york city mea 186-86-m vol - Iv usda requirements
- Ul 94-5v flammability classification (recognition no
- E300774) astm e 84 2" 25/50-tested according to ul 723 and nfpa 255 complies with requirements of can/ulc s102 03
- Fmrc approval guide chapter 14 pipe insulation
- Nfpa no
- 101 class a rating
- Meets requirements of nfpa 90a sect
- 2.3.3 for supplementary materials for air distribution systems
- Meets requirements of astm c 411 (test method for hot surface performance of high temperature thermal insulation)
- Meets requirements of ul 181 sections 11.0 and 16.0 (mold growth/air erosion)
Sold in package quantity of 72, priced each.
- Brand K-flex usa
- Manufacturers part number 6rx038048
- Package quantity 1
- Color finish Black
- Length feet 6
- Wall thickness inches 3/8
- Thermal conductivity 75°f mean .25 btu-in/hr-ft²-°f
- Ozone resistance Pass
- Water absorption % ≪0.20 by volume
- Density 3-6 pcf
- Water vapor permeability dry cup ≪0.06
- Mildew resistance/ air erosion Pass
- Type With core
- Description Tubular insulation
- Chemical/ solvent resistance Good
- Flame spread up to 1/2" thickness Not greater than 25
- Operating temperature range -297°f - 220°f
- Smoke developed up to 1/2" thickness Not greater than 50
- Thermal conductivity 90°f mean .27 btu-in/hr-ft²-°f
- Nominal inside diameter inches 1/2
