Leveling foot w/plastic cap, 3/8-16 x 3.93" stud, 2.36" base dia, 4.45"h, 2250 lbs. Cap, steel
Leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm²).
Leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm²).
- The values given in the table assume a straight compressive load, perpendicular to the foot
- The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly
- To insure proper leveling mount size, divide the machine weight by the number of feet required
- This will equal the pounds or load per leveling foot.
- Base diameter 2.36"
- Brand J.W
- Winco
- Construction Steel
- Description Leveling foot w/ clip-on rubber cap
- Manufacturers part number 40-60-3/8x16-100-a1-sk
- Country of origin Import
- Stud length 3.94"
- Load capacity (lbs.) 2250 lbs.
- Thread 3/8-16
- Load capacity range (lbs.) 1000 - 2500 lbs.
- Plastic base cap Elastomer plastic
- Unit of measurement Inch (imperial)
- Stud Pivots up to 6°
- Threaded stud & hex nut Zinc plated steel w/ blue passivated finish
- Height 4.45"
