Leveling mount w/lag bolt holes, 1/2-13 x 4" stud, 1.97" base dia, 5.375"h, 4000 lbs. Load cap
Leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm²).
Leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm²).
- The values given in the table assume a straight compressive load, perpendicular to the foot
- The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly
- To insure proper leveling mount size, divide the machine weight by the number of feet required
- This will equal the pounds or load per leveling foot.
- Base diameter 1.97"
- Brand J.W
- Winco
- Construction Glass filled nylon plastic
- Description Leveling foot (w/ bolt & lag bolt holes)
- Manufacturers part number 8t4wp1
- Country of origin Made in usa
- Stud length 4.00"
- Load capacity (lbs.) 4000 lbs.
- Thread 1/2-13
- Load capacity range (lbs.) 2500 - 5000 lbs.
- Unit of measurement Inch (imperial)
- Threaded stud & hex nut Zinc plated steel
- Height 5.38"
