- 35,000 btu/hr
- For high fire and 24,000 btu/hr
- For low fire operation
- Aesthetically designed to blend with nearly any decor
- Optional mounting wall, ceiling, pole, column mounting brackets, heat shield to lover clearances to combustibles above, and three position switch for low/high/off operation
- Requires 4 cfm per 1000 btu/hr
- Of total installed heater capacity by gravity or mechanical ventilation
- See installation and operating instructions for further information
- Made in the u.S.A features:
- Covers 8' x 8' area in high wind conditions or 12' x 12' area in minimal wind conditions equipped with tinted glass front and can withstand up to 40mph wind resistance high temperature silicone powder coated black paint angle mount from horizontal to 60 degrees typical mounting height at horizontal: 8 to 11 ft
- Minimum mounting height at 45 degree angle: 7 to 9 ft
- 3 year limited warranty on burner assembly csa certified
Weights & dimensions
- Coverage area 144 ft²
- Width 11-1/2 in
- Length 48 in
- Height 9-1/2 in
- Min clearance combustibles at horizontal Back 12, side 24, ceiling 20 , ceiling with heat shield 10, below 40 in
- Min clearance to combustible 30° angle Back 12, side 24, ceiling 23 , ceiling with heat shield 14, below 40 in
- Burner pressure 11 in
- Max mounting height 11 ft
- Gas inlet pressure max water column 14 in
- Min mounting height 7 ft
Product details
- Mounting location Chain suspension or wall
- Type Infrared
- Amps high 0.1 a
- Material Stainless steel
- Respirator connection type 1/2" npt male
- Fuel type Propane
- Voltage 120 v
- Description Infrared heater
- Btu high 35000
- Brand Sunstar
- Series Sgl glass
- Warranty 3 yr
- Hertz 60 hz
- Ignition type Direct spark
- Manufacturers part number Sgl35-l7
- Color family Black
Compliance & certifications
- Certifications Csa
We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.