Ideal for spot heating large areas. Dimpled tile assembly offers increased radiant efficiency. Made with corrosion resistant aluminized steel.
- Aluminum reflectors maximize radiant output
- Millivolt standing pilot heaters do not require electrical power and operate with 100% gas shut-off safety control
- Allows horizontal or angle mounting
- Includes protective radiant screen
- Csa certified
- This product has limited warranty of 1 year
- Note: installation and service must be performed by a licensed contractor and must conform to local codes
- In absence of local codes, installation must comply with national fuel gas code ansi z223.I (also known as nfpa 54) or cga b149 installation codes
- Requires 4cfm per 1000 btu/hr of mechanical ventilation of the total installed capacity
- Read installation and operating instructions prior to purchase
- Not certified or approved for residential use.
Weights & dimensions
- Min clearance combustibles at horizontal Side 49, ceiling 65, below 137 in
- Depth 33-3/8 in
- Min clearance to combustible 30° angle Front 65, rear 49, below 137 in
- Burner pressure 10 in
- Width 26-1/2 in
- Gas inlet pressure max water column 14 in
- Connection size 1/2 in
- Height 7-3/4 in
Product details
- Fuel type Propane
- Number of burners 4
- Voltage 120 v
- Assembly required No
- Btu high 130000
- Type Ceramic
- Amps high 0.4 a
- Brand Sunstar
- Warranty 1 yr
- Material Aluminized steel/aluminum
- Ignition type Direct spark
- Manufacturers part number Sg13-l
- Respirator connection type Npt female
