Ideal for spot heating large areas. Dimpled tile assembly offers increased radiant efficiency. Made with corrosion resistant aluminized steel.
- Aluminum reflectors maximize radiant output
- Millivolt standing pilot heaters do not require electrical power and operate with 100% gas shut-off safety control
- Allows horizontal or angle mounting
- Includes protective radiant screen
- Csa certified
- This product has limited warranty of 1 year.
Note: Installation and service must be performed by a licensed contractor and must conform to local codes - In absence of local codes, installation must comply with national fuel gas code ansi z223.I (also known as nfpa 54) or cga b149 installation codes
- Requires 4cfm per 1000 btu/hr of mechanical ventilation of the total installed capacity
- Read installation and operating instructions prior to purchase
- Not certified or approved for residential use.
Weights & dimensions
- Depth 16-3/4 in
- Min clearance combustibles at horizontal Back 45, side 48, ceiling 36, below 96 in
- Min clearance to combustible 30° angle Back 18, side 48, ceiling 36, below 96 in
- Burner pressure 6 in
- Width 52 in
- Gas inlet pressure max water column 14 in
- Connection size 1/2 in
- Height 9-3/4 in
Product details
- Fuel type Natural gas
- Assembly required No
- Btu high 104000
- Type Ceramic
- Brand Sunstar
- Warranty 1 yr
- Material Aluminized steel/aluminum
- Millivolts 750 mv
- Ignition type Millivolt standing pilot
- Manufacturers part number Sgm10-n1a
- Respirator connection type Npt female
